Database Quits at DoCmd.OpenForm?

[samn265]

I have a database that I converted from Access97 to Access2000. This database is copied from a server to a local workstation and gets executed from that station using AccessXP. I am puzzled of why the database quits on only one specific workstation but not the others. After I inserted some toggle points, I was able to find out what line of codes it is stopping at. Here is the line:

DoCmd.OpenForm "RM FORM PARTIAL CK", A_FORM, , , A_EDIT, A_HIDDEN

Do you guys see anything wrong with this code. Keep in mind that I do not have any problems with any other machines that run the same database!

Also, if I replace the above code with this:
DoCmd.OpenForm "RM FORM PARTIAL CK" by removing the “A_FORM, , , A_EDIT, A_HIDDEN” section from the code, the database will run with no problem!

I checked the references in all machines and they appear to have the same ones.

Any ideas, hints?

Thanks,
Sam
East or West Home is Best.

 

[AlexMidd]

I got this problem on and off when I started doing ex-97 db's in 2000. Never did suss out the reason. I would have to fiddle aboutn with it and even delete the offending form and start again. I know it doesn't solve your problem. Just letting you know I have seen it before was stumped. Have fun! )

Alex Middleton