Cucm not sending dtmf tones

[Tinos]

Hi all.

I have a sip trunk connected to cucm via cube. The sip trunk works fine the problem is that when I call a number that is answered by AA for example "Dial 1 for X" pressing the 1 does not work. It seems the AA does not get that a digit has been pressed.
How do I fix this problem?
Thank you.

 

[ReallyRotten]

Do you have the DTMF relay command on the CUBE?

 

[Tinos]

yes as follows:-
dtmf-relay rtp-nte

 

[gnrslash4life]

Just a follow up..you have that command on all your incoming dial peers correct?

Certifications:
A+
Network+
CCENT
CCNA Voice