Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

cucm 7.X TO cme VIA sip - cheat sheet

Status
Not open for further replies.
dulfo666

dulfo666

Technical User
Joined
Jan 1, 2007
Messages
488
Location
GB
Does anybody have a cheat sheet on setting up a SIP connection between CUCM 7x and CME. I am new to the CUCM (Nortel man) I have a link of sorts. Can dial from, get one way speach, but link drops after about 10 seconds.

So I am close but not there yet.
 
Status
Not open for further replies.

Similar threads

Edwin Effandy
  • Question Question
Cisco Manager 8.6.2 always hang to be remote after restart via CLI Command becomes normal
Replies
0
Views
64
Edwin Effandy
Edwin Effandy
DiyFrea
  • Locked
  • Question Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
635
DiyFrea
DiyFrea
Gnjiro
  • Locked
  • Question Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
1K
thepfy
thepfy
B
  • Locked
  • Question Question
Cisco IP Phone 7841 8851 unable to forward to external number
Replies
2
Views
660
keyset6
keyset6
homemade88
  • Locked
  • Question Question
"Callwithus" Setup CUCM
Replies
1
Views
651
gnrslash4life
gnrslash4life

Part and Inventory Search

Sponsor

Back
Top