CUCM 6.0.1 Hardware Conference unable to register

[etailleur]

Hi,

I use CUCM6.0.1 with Vmware and have been tried to register my 2811 witout success as an hardware conference bridge. I use this config and add the name exactly in CUCM6. I received an Error: DB config message when my router try to register. Any help ???

voice-card 0
dspfarm
dsp services dspfarm

sccp local FastEthernet0/0
sccp ccm 192.168.1.200 identifier 1 version 6.0
sccp
!
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register HWCFB-1
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP

 

[etailleur]

I found it thanks !!!

 

[pndscm]

Was it in your line 'associate profile 1 register HWCFB-1'? I think it needs to have the MAC address of the 2811 in there.

 

[etailleur]

No, i just choose the dixieland_CFB on cucm but i don't really know why i need to use that option ?

 

[acsee]

I ran in to the exact same issue when I did our 6 upgrade the other day and the TAC told me the same thing you just did. Informix is picky about having dashes, etc in the database.
For some reason the old scheme of MTP+mac address or CFB+ mac address no longer works either..