Good day all,
I hope you can give me some light on this problem.
The call scenario is as follows:
Node A:
CS1000E, CCPM, R500W + SS CCPM R5.00.31
SS TLAN IP: 172.25.15.20
Node IP: 172.25.15.50
SS Apps: SIP GW, H323GW, NRS (Primary)
Calling DN: 84177
Node B:
Static SIP Endpoint
IP: 172.25.15.60
Called DN: 83900
The call does not complete and I get fast busy on the phone.
When I trace the call on the SS, this is what I get:
oam> SIPCallTrace: (02/06/10 16:55:26) This is Outgoing Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Outgoing method INVITE(0) chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 INVITE
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26)
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
User-Agent: Nortel CS1000 SIP GW release_5.0 version_sse-5.00.31
SIPCallTrace: (02/06/10 16:55:26)
Media Info: 10.33.131.119 Codecs: G729(18) G711 U-Law(0) G711 A-Law(8) Dynamic(101) Dynamic(111) Payload: 0 ms Media State: SIPNPM_
MEDIA_SENDRECV
SIPCallTrace: (02/06/10 16:55:26) This is Incoming Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Incoming response 302 Moved Temporarily chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 INVITE
SIPCallTrace: (02/06/10 16:55:26)
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26) This is Outgoing Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Outgoing method ACK(1) chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 ACK
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26)
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
User-Agent: Nortel CS1000 SIP GW release_5.0 version_sse-5.00.31
02/06/2010 16:55:26 LOG0006 tSPMsg: MPLR27605: spOsipEventHandle: lineno 1516, duplicate event found.
After the 302 Moved Temporarily Message I was expecting to see something like this:
Contact: <sip:83900;phone-context=cdp.udp@servicedomain.com:5060;maddr=172.25.15.60;transport=udp;user=phone;x-nt-redirect=redirect-server>
However that line never shows and there are no more SIP Messages after the ACK(1)
If I run a SIP Routing Test to DN 83900 in the NRS, then I get the correct information, the tool points to 172.25.15.60 which is the static SIP Endpoint.
I guess the answer is in this message: 02/06/2010 16:55:26 LOG0006 tSPMsg: MPLR27605: spOsipEventHandle: lineno 1516, duplicate event found. But I don't know how to read it.
Any guidance is appreciated,
Thanks
I hope you can give me some light on this problem.
The call scenario is as follows:
Node A:
CS1000E, CCPM, R500W + SS CCPM R5.00.31
SS TLAN IP: 172.25.15.20
Node IP: 172.25.15.50
SS Apps: SIP GW, H323GW, NRS (Primary)
Calling DN: 84177
Node B:
Static SIP Endpoint
IP: 172.25.15.60
Called DN: 83900
The call does not complete and I get fast busy on the phone.
When I trace the call on the SS, this is what I get:
oam> SIPCallTrace: (02/06/10 16:55:26) This is Outgoing Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Outgoing method INVITE(0) chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 INVITE
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26)
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
User-Agent: Nortel CS1000 SIP GW release_5.0 version_sse-5.00.31
SIPCallTrace: (02/06/10 16:55:26)
Media Info: 10.33.131.119 Codecs: G729(18) G711 U-Law(0) G711 A-Law(8) Dynamic(101) Dynamic(111) Payload: 0 ms Media State: SIPNPM_
MEDIA_SENDRECV
SIPCallTrace: (02/06/10 16:55:26) This is Incoming Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Incoming response 302 Moved Temporarily chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 INVITE
SIPCallTrace: (02/06/10 16:55:26)
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26) This is Outgoing Message
SIPCallTrace: (02/06/10 16:55:26)
Message: Outgoing method ACK(1) chid: 60 Called num: 83900 Far End Signaling IP: 172.25.15.20:5060 Transport:UDP CSeq: 1 ACK
From: <sip:84177;phone-context=cdp.udp@service_domain.com;user=phone>
SIPCallTrace: (02/06/10 16:55:26)
To: <sip:83900;phone-context=cdp.udp@service_domain.com;user=phone>
User-Agent: Nortel CS1000 SIP GW release_5.0 version_sse-5.00.31
02/06/2010 16:55:26 LOG0006 tSPMsg: MPLR27605: spOsipEventHandle: lineno 1516, duplicate event found.
After the 302 Moved Temporarily Message I was expecting to see something like this:
Contact: <sip:83900;phone-context=cdp.udp@servicedomain.com:5060;maddr=172.25.15.60;transport=udp;user=phone;x-nt-redirect=redirect-server>
However that line never shows and there are no more SIP Messages after the ACK(1)
If I run a SIP Routing Test to DN 83900 in the NRS, then I get the correct information, the tool points to 172.25.15.60 which is the static SIP Endpoint.
I guess the answer is in this message: 02/06/2010 16:55:26 LOG0006 tSPMsg: MPLR27605: spOsipEventHandle: lineno 1516, duplicate event found. But I don't know how to read it.
Any guidance is appreciated,
Thanks