CS1000E/Meridian 1 Opt 11C System Capacities 1

[donavasq]

Hi Everyone,

I'm looking forward to upgrade an Option 11C Cabinet to CS1KE and I want to know which are the system limits on the existing system, that is, regardless of the hardware installed on this particular system.

The information needed is:

Digital Sets Limits--->?
Digital Trunks Limits--->?
IP Sets Limits (in case of upgrading to current release)--->?

Thanks

 

[GHTROUT]

http://www.nortel.com/solutions/multimediacomm/collateral/nn121201.pdf

GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[donavasq]

Thanks GHTROUT.

What I see in the document is that if you have a system with 512 MB of memory, you will get the highest capacity. How can I measure the capacity of a system with only 32 MB?

 

[rpneal44]

Depending on your current config, here is a Nortel doc that references Opt 11 capacities:

http://products.nortel.com/go/product_content.jsp?segId=0&parId=0&prod_id=16001

If this isn't what you're looking for, and maybe you've already done it, then go to LD 22, and PRT SLT. That will givie you your current system/software limits.