Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CS1000E and Conference Warning Tone

Status
Not open for further replies.

dlesap

Programmer
Joined
Aug 18, 2003
Messages
1,295
Location
GB
Does anybody know how to turn on/off the conference warning tone on a CS1000E?
Usually on a large system as Opt61/81, on the XCT board there is a jumper for that purpose.
On a small system, in LD 97, there is a prompt in XCTP block.

But for CS1000E, how to do it? No XCT board but VXCT, no prompt in LD 97...

Feedback welcome
 
check the cdb, that may be the new hiding place.. don't have my book here

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top