Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cs1000e 7.6 blind transfer not working

akak247

Programmer
Joined
May 8, 2011
Messages
20
Location
KE
I have cs1000e rls 7.6 connected to asterisks using sip trunks.

I am unable to complete a blind transfer to asterisks extn,
The transfer only happens when the asterisks extn answers the calls.

Is there any trunk configuration required for blind transfer to work.

Thanks.
 
The same thing was happening to me until I activated this:

PLUGIN STATUS PRS/CR_NUM MPLR_NUM DESCRIPTION
---------------------------------------------------------------
501 ENABLED Q02138637 MPLR30070 Enables blind transfer to a SIP endpoint even if SIP UPDATE is not supported by the far end
 

Part and Inventory Search

Sponsor

Back
Top