Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Crystal Report Bar Chart Always want Top 10
- Thread starter pgovind27
- Start date
Please don't start multiple posts on the same topic.
You can highlight the "on change of" field in the chart->topN and choose topN = 10, so that when there are 10 or more values, only the top 10 will be shown. But if there are less than 10, there will only be the number of bars as found in the data--you can't force the number if the data isn't there.
-LB
You can highlight the "on change of" field in the chart->topN and choose topN = 10, so that when there are 10 or more values, only the top 10 will be shown. But if there are less than 10, there will only be the number of bars as found in the data--you can't force the number if the data isn't there.
-LB
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question