Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CREATING A TEST ENVIRONMENT
- Thread starter pll7538
- Start date
Get yourself two WIC-1T cards, one for each router and then buy DTE and DCE parts of serial cables. Using these cables connect your 2 routers together, just make sure that the router connected with DCE part of cable is using "clock rate" command under its serial interface to simulate clocking function for synchronization. Then you can configure HDLC, PPP and Frame Relay. Maybe few others, just can't think about them right now. And if you have the proper IOS, you can even simulate VPN connection
You surely want to check out search on:
it has tons of configuration examples on almost anything
Peter Mesjar
CCNP, A+ certified
pmesjar@centrum.sk
"The only true wisdom is in knowing you know nothing.
You surely want to check out search on:
it has tons of configuration examples on almost anything
Peter Mesjar
CCNP, A+ certified
pmesjar@centrum.sk
"The only true wisdom is in knowing you know nothing.
- Status
Similar threads
- Locked
- Question
- Locked
- Question