Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Creating a INET test lab

Status
Not open for further replies.
lobo66

lobo66

IS-IT--Management
Joined
Nov 12, 2002
Messages
106
Location
US
In theory should this work:

SW 1
FA 0/24
switchport access vlan 65

This has a uplink to router 1
eth 0/0
ip address 192.168.65.254/24
eth 0/1
no ip address
- ip route 0.0.0.0 0.0.0.0 eth 0/1

this interface has an uplink to
SW 51
FA 0/3
switchport access vlan 65
this switch has an uplink to my internet router which has a T1 to the internet.
 
Status
Not open for further replies.

Similar threads

jobsp90
  • Locked
  • Question Question
I have a issue in my office hospital network regarding using IPPBX software.
Replies
2
Views
541
DavetheChef
DavetheChef
Gartech
  • Locked
  • Question Question
LAN Port Test Device
Replies
3
Views
478
ipohead
ipohead
CPM86
  • Locked
  • Question Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
571
CPM86
CPM86
B
  • Locked
  • Question Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
413
badwolf1686
B
jarod_paris
  • Locked
  • Question Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
626
jarod_paris
jarod_paris

Part and Inventory Search

Sponsor

Back
Top