Create a Valid DN 3

[Trevor Stuart]

I'm going to be porting a group of numbers into an Option 11c.
The numbers do not currently have any DNs matching in the Option 11c.
Will the DN magically appear when I port the DID? Or is there a way to make the Option 11c show some DN's?

For example I want to port in xxx-xxx-9122
In the Option 11c when I checked for ext 122 I get the error SCH0881.
REQ PRT
TYPE:
TYPE DNB
CUST 0
DN 122
DATE
PAGE
DES

SCH0881


I can use IDC to direct 9122 to a DN that does exist. But is there a way to create a new DN of 122 in the system, since it's not already in use?
This is simular to another question I had, but in my other post the DN actually did exist. In this case it does not exist and according to the error No valid DN can be found starting with specified digits.
I'd like to make 122 a valid DN, if that's possible?

 

[Firebird Scrambler]

Hello Trevor

This is all down to number conflicts. When you did a search using "DNB" with number 122, you got an error as a shorter number was being used. Try a search with "DNB" using a different number such as "1" or perhaps "12" etc. You should see a list on what numbers were allocated.


Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[bignose21]

probably find that 12 is you SPRE at a guess

 

[Firebird Scrambler]

I think from a previous thread that "11" was the SPRE and 1299 was an ACD queue

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[StanleySteamer]

All you need to do is program 122 somewhere. Try creating a new phone with KEY 0 SCR 122.
A DN doesn't "exist" until it is programmed somewhere.

 

[bignose21]

Just LD 20 print the DNB for 1 and find the clash.

 

[Trevor Stuart]

Creating the extension worked... For any that are an issue, like 129 was in my previous post, I get an error. But for the few that simply were never in the system it creates them just fine!

Thanks again for all the help!