CP Applications Builder CP 4.0

[worldwidedialtone]

Doing a new install (11C or 1000M if you want to be technical 4.5) Can CP applications builder be loaded to a PC and actually build an auto attendant before the system is ready installation wise? Got an AA to build with 5 seperate languages and want to get a head start as I have had limited experience with CP. Thanks in advance for any info.

 

[johnpoole]

yes, your on the right target, i did a migrate, weeks before my cut date, then built 30 menus using the same recordings from the mermail. if this is a new install you can build and test those menus or auto-att's before cut. i built a temp acd/cdn to test and record with. then for the upgrade i reran the migration, went back through the install wizard and changed my acd-dn, added the correct vsdn's and it came right up. total down time between mail and call pilot was under 15 minutes

john poole
bellsouth business
columbia,sc

 

[worldwidedialtone]

New install so MM not there (wish it was I understood MM) Was told there is a way to export what I wish to so we can get all the recordings in place then once the switch is up and I connect this PC to the switch with a LAN connection I can "import" all we have done and place the auto attendant into service rather quickly and painlessly.