New install - MICS 7.0 with CallPilot 150 3.0 DN's start at 1160 (to match PRI DID's). CallPilot will not allow me to create mailbox 1171 (prompts with "invalid mailbox") through web interface or f983. All others work I have plenty of licensing for additional mailboxes. 9 is used for PRI routing 6 is being used for pool A. I have created a different numbered mailbox for the ext in question, but am baffeled why I cant create 1171. Has anybody else had this problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CP 150 Ext issue
- Thread starter v2d
- Start date
lugerlover
Programmer
check in config of vm/cp for system command propmts and change
phoneygirl
Programmer
Possibly a conflict with "name prefix" or "special prefix", both settings on "system properties" page.
Elise Levine
NYC
Elise Levine
NYC
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question