CP 150 Connections

[Tom2129]

Replacing a CP 100 with a CP150, are we able to use 4 pin RJ11 clips or should they be the 6 pin clip?
Thanks
Tom

 

[ironhorse17]

You are just using 2 pins.

One port = 2 channnels. B1 & B2

 

[Tom2129]

thanks, only asking because the manual shows using pins 2/5 & 3/4 in order to get 2 extensions per port I'm guessing

 

[allworxguy]

CP 150 is 2 ports per... RJ12.

Marv

http://www.telemarv.ca

 

[Crowtalks]

CP150 has four leds on the front, which means four ports...and four digital stations. I believe you will get ports 1 & 3 from the first line cord and 2 & 4 from the second line cord connected to w/b & w/o of the jacks. CP150 comes with 20 MBs standard, expandable to 1000 MBs.

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0

 

[allworxguy]

Actually Jim the CP150 starts with 32 MBs and can grow to only 200.

Marv

http://www.telemarv.ca

 

[exsmogger]

Marv, I just sold a couple of CP-150's last week that had 300 mailboxes.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[ironhorse17]

CP 150 default 20 to 300 mailboxes.

 

[Crowtalks]

Yeah...a thousand would be a bit much for a MICS...I must have been thinking about the CP 5.0 on the CS1000E...

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0

 

[exsmogger]

Jim, the old NAM had up to 1000 mailboxes as well.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952

 

[allworxguy]

@Brian... oops typo!

Marv

http://www.telemarv.ca