Copying a new phone 1

[kellygirl01]

Hello,

Our PBX in a Meridian Option 11c.

We just installed a new Phone and would like to copy the same settings from an existing phone to another.

How can i copy the settings then change the DN?

 

[pbxn]

So long as it is not an acd phone,
Ld 20
Req cpy 1
Type (whatever phone type it is)
CFTN (copy from TN)
TOTN (the one you want to copy to)
DN (the dn you want to use)
enter....

 

[janaya]

ld 10
req: cpy 1
type: 2008 (or whatever type you are copying)

cftn: 12 0 0 0 (or whatever tn you are going to copy)
sftn: tndn (not sure on the prompt)
tn: 12 0 0 1
dn : 1234 (or whatever the new dn will be)

it will print out the new DN and TN.

If you have a second DN on the phone, just change the phone you created and change the DN to a new DN

ld 11

req: chg
type: 2008
TN: 12 0 0 1
echg: yes (if it is NOT an ACD phone) (just my opinion)
ITEM: Key 1 5678 (whatever the key you need to change with the new DN.)

Hope this helps.

John

 

[kellygirl01]

Is a Meridian M2616 an ACD phone?

 

[McGruff753]

As long as you are not programming any ACD functionality on the 2616, you are okay to copy. Otherwise you will have to create it NEW.

 

[McGruff753]

Just to be safe, why don't you post the TN you want to copy from here so we can see it. Thanks.

 

[kellygirl01]

3 0 0 12

 

[kellygirl01]

Ok i copied and when i dial the new extension there's no display name?

 

[Arugg]

Kelly:

Please post the TN info.

LD 20
PRT
tnb
3 0 0 12

Then copy and paste the info here.

 

[kellygirl01]

I figured it out, just had to add the name in LD 95.

Thanks for yor help!

 

[johnpoole]

way to go, when you print tnb or dnb, you'll see the name.

john poole
bellsouth business
columbia,sc

 

[jortizoconnor]

HOW DO I FIND THE TN OF A VOICE LINE JUST DROPPED AND ALL I HAVE IS THE VOICE DROP NUMBER IE. 4036 [4 = 4TH FLOOR, 036 = VOICE DROP # 36]?


SORRY I A NEWBEE AND NEED SOME ASSISTANCE TO THIS MERIDIAN GAME!! THANKS.


****

 

[johnpoole]

you don't, those number are part of a lan numbering scheme. they almost never are used in the switch, if so it would be as a des. since you stated new drop.. usually it would have to be jumpered or patched back to a unused port (tn)

john poole
bellsouth business
columbia,sc

 

[jortizoconnor]

i will try to jumper and give you some feed back on my attempt!!!

thanks

****

 

[jortizoconnor]

Got it thanks, you are right on the money!!!

****

 

[acewarlock]

jortizoconner: again you ask a completly new and differant question in someone elses post. PLEASE start your own post, if you don't know how ASK.