Conversion of analog to digital and vice versa

[themegalord]

Can someone tell me how I can move a DN from an analog TN to a digital TN and vice versa? This should include changing from a 500 type to a 3902/3904 type. Also, how can I delete DNs from any TN?

Thanks. I await your response!

 

[acewarlock]

Just add the DN to a TN to change it.

You delete a DN by changing it or using X at the prompt DN X for analog Phone or KEY xx NUL (xx being the key number) for Digital phones.

 

[johnpoole]

you can't dn x1000 to delete a dn, that would leave an analog without a dn.. just change the dn thru echg or out the set.. you can blank a key, and you can have digital stations without a line..that would require key 0 nul.. leaving that key empty.. to change from a digital to an anaolg or dig to analog.. you need to out the digital or analog, for the correct type of tn and build it new, as well as move the jumper..

ld 10
out
500
4 0 0 0 (analog card, analog tn)

ld 11
new
3904
20 0 0 0 (that has to be an digital tn)

fastest way be build a new digital set is find one simular to the one you want and do a ld 11, cpy 1.. that requires you enter a vacant tn and dn

john poole
bellsouth business
columbia,sc