Converse-on vector command????

[archer1300]

Does anyone know how the converse-on command works in vectoring.

Were adding a second menu or program to our VRU and I need to pass DNIS to the VRU so it knows how to answer the call.

 

[Definity]

You can use converse on command with VRU interface. Make sure you have a hunt group for the ports connected in VRU & use converse on with something like below:-

converse-on skill 1 pri m passing vdn and ani

Where skill # is the skill for VRU
& variable after "passing" are the one which you need to pass on to the VRU for use..
Hope this helps.