connect VOICE 200 to NIU2 board

[ges69]

Sorry for my english. I want to connect an old VOICE 200 to NIU2 board, in the MD110 system BC12 SP6. This is the configuration that I have create:
IOBPI:NODE=BEGNI,BPOS=2-0-12;
IOEQI:IODEV=VOICE,EQU=2-0-12-2,USAGE=OUT;
ICFUI:IFCIND=1,IODEV=VOICE,DFMT=4,UPDFCN=YES;
ICFUC:UPDTIM=01-30;
ICFUC:MWF=ALL;
ICFUC:IFCIND=1,FILLER=32;
ICMWC:SID=1,DTXT=B5BSB01B,KFCN=MWC,DIG=5995;
VMFUI:IFCIND=1,VMF=EXTN2,POFMT=2;
VMPOI:IFCIND=1,DIR=5991,PORT=05;
VMPOI:IFCIND=1,DIR=5992,PORT=06;
VMPOI:IFCIND=1,DIR=5993,PORT=07;
VMPOI:IFCIND=1,DIR=5994,PORT=08;
VMPOI:IFCIND=1,DIR=5996,PORT=01;
VMPOI:IFCIND=1,DIR=5997,PORT=02;
VMPOI:IFCIND=1,DIR=5998,PORT=03;
VMPOI:IFCIND=1,DIR=5999,PORT=04;
VMPOI:IFCIND=1,GRP=5985;
VMPOI:IFCIND=1,GRP=5995;
this is the old configuration on ICU board:
VMPOI:IFCIND=1,DIR=5991,PORT=05;
VMPOI:IFCIND=1,DIR=5992,PORT=06;
VMPOI:IFCIND=1,DIR=5993,PORT=07;
VMPOI:IFCIND=1,DIR=5994,PORT=08;
VMPOI:IFCIND=1,DIR=5996,PORT=01;
VMPOI:IFCIND=1,DIR=5997,PORT=02;
VMPOI:IFCIND=1,DIR=5998,PORT=03;
VMPOI:IFCIND=1,DIR=5999,PORT=04;
VMPOI:IFCIND=1,GRP=5985;
VMPOI:IFCIND=1,GRP=5995;
VMFUI:IFCIND=1,VMF=EXTN2,POFMT=2;
ICFUI:IFCIND=1,EQU=2-1-13-0,RATE=1200,PARITY=EVEN,CCHECK=YES,TXC=YES,DFMT=4,UPDFCN=YES,FILLER=32;
ICFUC:UPDTIM=01-30;
ICFUC:MWF=ALL;
why my system don't work?
thanks!

 

[doktor]

You will need to tell the NIU2 the baudrate of 1200 bits/sec, and the data setup 7 bits, even parity and 1 stopbit.
IOIFC:EQU=2-0-12-2,IODEV=VOICE,BAUDR=1200,WORDL=7,PARITY=EVEN,STPBIT=1;
Check with IOIFP;
Then it should work.
Good and stable that OCTEL VOICE 200 product!

///doktor

 

[doktor]

Also swap this line:
ICMWC:SID=1,DTXT=B5BSB01B,KFCN=MWC,DIG=5995;
with this:
ICMWC:SID=1,DTXT=5995,KFCN=MWC,DIG=5995;

Then you can see the group number of the Voice 200 in the display of your Dialog system telephone when you press the active MEW button.

///doktor

 

[ges69]

Thanks Doktor for your reply, the configuration is working, but for the NIU configuration the EQU parameter isn't needed:
<IOIFC:EQU=2-0-12-2,IODEV=VOICE,
BAUDR=1200,WORDL=7,PARITY=EVEN,STPBIT=1;
NOT ACCEPTED
TOO MANY PARAMETERS ENTERED

<IOIFC:IODEV=VOICE,BAUDR=1200,WORDL=7,PARITY=EVEN,STPBIT=1;
EXECUTED

I also find the way to change the system configuation of the OCTEL VOICE 200:

-------- SYSTEM CONFIGURATION UPDATE --------

TUE 10/03/2006 14:41:23 NEWSYS ID:0 S/N:205210 PBX:58

At the dot (.), enter ? for HELP.
.l sys
Enter system parameter index.
LST:271
INDEX VALUE (LST/MOD) PARAMETER NAME:

271 1200 L/M RS232 INTEGRATION BAUD RATE

.l sys
Enter system parameter index.
LST:180
INDEX VALUE (LST/MOD) PARAMETER NAME:

180 7 BITS E/P L/M RS-232 INTEGRATED WITH PBX

.m sys
Enter system parameter index.
MOD:271
Enter the baudrate for terminal #2 for RS-232 Integration
(1200,2400,4800,or 9600, empty line = 1200)
MOD:

Enter system parameter index.
MOD:180
Enter the type of RS-232 byte FORMAT for PBX INTEGRATION:
0 = 7 bits/even parity.
1 = 8 bits/no parity.
( 0-1, empty line = 0 ).
MOD:

Enter system parameter index.
MOD:
.

sorry for my english...good work and a little italian story;

LE TELECOMUNICAZIONI FANNO GIRARE IL MONDO, A NOI FANNO GIRARE LE PALLE!!!

 

[doktor]

Hello in Italy.

I have an italian friend that I will have to translate your last line...
Anyway, your OCTEL 200 runs ID=0, and the MD110 runs ID=1.
MD110: SID=1
ICMWC:SID=1,DTXT=B5BSB01B,KFCN=MWC,DIG=5995;
OCTEL 200: NEWSYS ID:0
You need to send this line to the MD110 to set the ID to 0:
ICMWC:SID=0,DTXT=5995,KFCN=MWC,DIG=5995;

Or in the OCTEL 200 set:
.M SYS #2 (system ID) to 1, if you dont want to change the MD110.
///doktor

 

[doktor]

If you change the system ID on the OCTEL 200, you need to restart the OCTEL 200 after this.
. L SYS
LIST:2
5 L/M SYSTEM ID NUMBER

.M SYS
This command is used to change the sys id.
///doktor

 

[doktor]

TELECOMUNICATIONS SPIN THE WORLD, BUT IN OUR CASE THEY SPIN OUR B...!!!
This was the translation??
///doktor

 

[ges69]

Hello

Thanks for Your help, now all is working as well
We have changed the ID:0 in ID:1 in the VOICE 200.

Your translation is rigth
Anyway, ours little italian story, is only a joke,
we are happy to work in a telecomunications company
not in Italy but in Republic of San Marino

Thanks a lot for all.
Best regardes.

 

[doktor]

Hello!

Interesting. I was in the Republic of San Marino many years ago. Beautiful place.
Please check thread923-831490 for more info on the OCTEL 200.
///doktor