Configuring PRI ports

[stroyer74]

I am working with our Merlin Magix system in Hybrid/PBX mode. We currently have all outbound calls going out through our pool 70 which is a number of POTS lines. I've just added a DS100 card which will be giving us PRI ports (I think they show as ports 813 through 836).

Can anyone give me some direction on where to change the Magix system to route all outbound calls through the PRI ports?

Thanks in advance,
Sheldon

 

[Westi]

you could either assign the lines in the pool that the analog lines are using and change the pool for the analog lines or go into the ARS and change it there after putting the PRI lines into a separate pool.

Joe W.

FHandw., ACS

If you can't be good, be good at it!