Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring PAT/NAT

Status
Not open for further replies.
epsilon6

epsilon6

Technical User
Joined
Sep 21, 2002
Messages
44
Location
US
Could someone help me configure NAT.

I would like to make my router addr 206.66.66.66 (fake address) port 5633 tcp and point it to address 10.0.0.6 port 5631, using access lists. Could anyone help me this? I go to the cisco website and look at their examples of NAT translations, but it does not have what I am looking for.
 
Sort by date Sort by votes
ip nat inside source static tcp 206.66.66.66 5631 10.0.0.6 5631 extendable
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

darktriad
  • Locked
  • Question Question
Cisco ASA 9.4: Configuring NAT
Replies
0
Views
363
darktriad
darktriad
netguy2000
  • Locked
  • Question Question
Cisco router 1841 NAT/PAT problem
Replies
0
Views
272
netguy2000
netguy2000
ngtri
  • Locked
  • Question Question
Please, need your help to check my configurations. NAT and HSRP
Replies
0
Views
321
ngtri
ngtri
DarthPanda
  • Locked
  • Question Question
No Telnet after NAT outside
Replies
2
Views
357
DarthPanda
DarthPanda
jmkelly
  • Locked
  • Question Question
Partly-dynamic / partly-static NAT
Replies
2
Views
363
jmkelly
jmkelly

Part and Inventory Search

Sponsor

Back
Top