Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Configuring ISDN

Status
Not open for further replies.

cisco420

Technical User
Jul 11, 2005
1
US
hi all
i'm new to this forum..
my question is how can i check on my 2611 router if the ISDN S/T Card is working fine.
thanx...
 
If you type 'show isdn status' you should see the layer-1 & Layer-2 details, this will verify if you are 'speaking' to the ISDN line OK. Beyond that there is a lot of other stuff in IOS regarding encapsulation, authentication, layer-2 addressing, routing etc that will dictate whether you can pass traffic over the link.

Andy
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top