Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configuring ISDN
- Thread starter cisco420
- Start date
If you type 'show isdn status' you should see the layer-1 & Layer-2 details, this will verify if you are 'speaking' to the ISDN line OK. Beyond that there is a lot of other stuff in IOS regarding encapsulation, authentication, layer-2 addressing, routing etc that will dictate whether you can pass traffic over the link.
Andy
Andy
- Status
Similar threads
- Locked
- Question