Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

configuring dual nics on a video managment server

Status
Not open for further replies.

VTG407

Technical User
Aug 21, 2012
1
0
0
US
Iam an installer, I have two video servers with dual port nics, one port is configured with ip,subnet mask, and a gateway. The second port is configured with an ip and subnet mask with no gateway. Both servers are congigured in the same manner. The problem is that the servers continue to lose network connectivity which means I lose all camera feed on that server. I have two switches, one for each server and both switches are comnected to my router. What can I do to resolve my network issue?
 
You do understand that you cannot have the dual NICs in the server share an IP address in the same subnet?
This can only be done if the NICs have special software that "bonds" the NICs together to create a new logical NIC so throughput/failover purposes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top