Configuring Cisco 2620 with T1line

[Bunnyakay315]

Hi, I need help bad..I would appreciatte if someone could help me. Here is the scenario:

Client with ISP connection has to be connected with cisco Router 2620 with T1lines. How to configure so as to pass the traffic between the two.

 

[jeter]

you would need to get the ip information from the providor.

WAN ip and subnet (example 64.12.34.2 255.255.255.252)
LAN ip and subnet (example 208.17.12.1 255.255.255.248)
setup a route (0.0.0.0 0.0.0.0 64.12.34.1)

this would be more of a point to point setup.

Is this a PPP or a frame relay? “Reserve your right to think, for even to think wrongly is better than not to think at all”

Fisher CCNA