systemsadmin3000
Technical User
I have a SUN STOREDGE L8 tape library that I attached via SCSI to a SUN server running solaris 8. How do I configure solaris to recognise this tape library? Not really experienced with solaris/unix.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Configuring a tape drive in Solaris 8
- Thread starter systemsadmin3000
- Start date
- Status
domburns62
IS-IT--Management
Two methods-
1) Issue the following commands (as root)- may not work, but avoids a reboot-
# drvconfig
# devlinks
# tapes
2) Do a reconfiguration reboot of the system-
# reboot -- -r OR
# touch /reconfigure; reboot
I would suggest looking at upgrading the system off of Solaris 8, as that OS release went intop the limited support model as of last April.
1) Issue the following commands (as root)- may not work, but avoids a reboot-
# drvconfig
# devlinks
# tapes
2) Do a reconfiguration reboot of the system-
# reboot -- -r OR
# touch /reconfigure; reboot
I would suggest looking at upgrading the system off of Solaris 8, as that OS release went intop the limited support model as of last April.
- Thread starter
- #3
systemsadmin3000
Technical User
Method 1 worked. Thanks a mil.
This server is used for a test environment that's why we still have it a solaris 8 but eventually we would upgrade. Thanks again.
This server is used for a test environment that's why we still have it a solaris 8 but eventually we would upgrade. Thanks again.
- Status
Similar threads
- Locked
- Question