configure rip on pix 515e

[ba0821]

Any help will be grateful.
I have pix with 5 zones, everything is working fine communicated btw them
My network addresses are
(inside 172.16.14.0),
(outside 00.0.0.0),
(dmz 192.16.6.0)
(production 192.168.40.0)
P2p 192.168.10.0 running IBGP between my two sites)
I'm running BGP to at&t.
All the routes on the PIX are tatic. My question is if the at&t link is down there are no ways for servers in the dmz and prod. zone to go out since the default gw for them is the outside interface.

Will running RIP solve this problem if not how can I fix this problem?
Thanks in advance

 

[yizhar]

HI.

> ... servers in the dmz and prod. zone to go out since the default gw for them is the outside interface ..

I don't fully understand the scenario here, but anyway the default gateway of any host connected to the pix should be the connected interface.
The dmz servers default gateway should be the ip of the dmz interface, etc.

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar