We have a Pix Firewall that has 4 point to point tunnels. We want to setup NAT for one of the tunnels to hide our internal address's behind one of our public address to the remote site.
This way if we connect to a remote computer at the other site they will just see our public address not our private range.
The reason we are trying to do this is that one of our remote sites run on the same IP range as our main site and we do not want to have IP conflicts. I would just change the IP range but that would require changing not only DHCP, but WINS and DNS at several locations with hundreds of computers and dozens of servers.
PLease Help.
This way if we connect to a remote computer at the other site they will just see our public address not our private range.
The reason we are trying to do this is that one of our remote sites run on the same IP range as our main site and we do not want to have IP conflicts. I would just change the IP range but that would require changing not only DHCP, but WINS and DNS at several locations with hundreds of computers and dozens of servers.
PLease Help.
