Configure EuroISDN E1 on CM

[dclake]

Hi everyone, I am trying to configure a EUROISDN E1 but seem to be lost. When I test the board I get this:
ort Mtce Name Alt. Name Test No. Result Error Code

001V3 MG-DS1 138 PASS
001V3 MG-DS1 139 PASS
001V3 MG-DS1 140 PASS
001V3 MG-DS1 141 PASS
001V3 MG-DS1 142 PASS
001V3 MG-DS1 143 PASS
001V3 MG-DS1 144 PASS
001V3 MG-DS1 145 PASS
001V3 MG-DS1 146 PASS
001V301 ISDN-TRK 0001/001 36 PASS
001V301 ISDN-TRK 0001/001 255 FAIL 8
001V301 ISDN-TRK 0001/001 256 ABORT 1116
001V301 ISDN-TRK 0001/001 257 ABORT 1116
001V302 ISDN-TRK 0001/002 36 PASS
001V302 ISDN-TRK 0001/002 255 FAIL 8

How can I configure?

NCDS | NCSS | APSS - SME | ACIS - SME | ACSS - SME | ACIS - UC | ACSS - UC | APSS - SCOPIA | APDS - SCOPIA | CCENT

 

[BIS]

What have you configured so far?