Configure cisco 805 serial for db connection

[AlPhACoDeR]

Hi,
I alredy set up my oracle database and it works on the LAN.. now, I want to configure router (cisco 805 serial) so that I can access my database from the other locations (through internet). I own leased line (connectio through router/modem).. I tryed with NAT and no success.. please help me to configure router/oracleDB/win2k server

thnx to all

 

[KiscoKid]

Unfortuantely it's not that easy to provide you with a detailed configuration of the router as there is some information missing.

However fromt the little bit you have revealed (leased line), the following link from Cisco explains how to setup a leased line connection with the 805. I think the bit you may be interested in is what they call 'Network 1: Leased Line, HDLC'. This is one of the simplest setups you can have and I'd recommend simple solutions where possible.

Anyway, have a look and see if you can make any progress using the guidelines Cisco have defined. If you hit a brick wall, drop a note here and try to provide as much detail as possible.

http://www.cisco.com/en/US/products...figuration_guide_chapter09186a008007cde9.html

Hope this helps