config verification if possible

[DManigo]

Cisco 827-4v connected to a Cisco 1924 switch. I'm still learning how to work with Cisco hardware. Looking for someone to verify my config.
My goal is to have the network 192.168.1.0/24 access the internet as normal, 192.168.1.4 statically assigned to server running website and FTP site. Please advise as I conitue to learn.

ip subnet-zero
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.4
ip dhcp pool cisco
network 192.168.1.0 255.255.255.0
domain-name 5thborocs.com
dns-server 63.162.197.69 207.217.126.81 204.117.214.10
default-router 192.168.1.1
bridge irb
interface Ethernet0
ip address 192.168.1.1 255.255.255.0
ip nat inside
hold-queue 100 out
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5snap
dsl operating-mode auto
bridge-group 1
interface BVI1
ip address 63.162.201.72 255.255.255.0
ip nat outside
ip nat service list 1 ftp tcp port 21
ip nat inside source list 1 interface BVI1 overload
ip nat inside source static tcp 192.168.1.4 80 63.162.201.72 80 extendable
ip classless
ip route 0.0.0.0 0.0.0.0 63.162.201.1
no ip http server
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 2 permit 192.168.1.4
access-list 2 permit 192.168.1.0 0.0.0.255
access-list 2 permit any
access-list 3 deny 192.168.1.4
access-list 3 permit 192.168.1.0 0.0.0.255
access-list 100 permit tcp any host 192.168.1.4 eq ftp
access-list 100 permit tcp any host 192.168.1.4 eq www
bridge 1 protocol ieee
bridge 1 route ip