Concurrent users in DISA mode

[singhbrindisi]

Dear All,

Can someone out there confirm if there is any limitation ( S/W or H/W) for concurrent users looking in to dial out using DISA functionality on BC11Sp11 system....
System is 45 Lim & dial-in/out lines are ISDN E1 (SLP60)...

Needs to confirm if there are any Limitations with PU's or HW ( TMU/LPU)involved in DISA functionality so to put any kind of restriction of concurrent users..

Do understand limitations about Incoming or Outgoing trunks...

Pls input any ideas into this generic discussion...

Cheers,



""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[alchohaz]

I cannot see anything in ALEX pertaining directly to DISA. Along with the limitations on the amount of trunks etc that you have mentioned above, i would say you would also have the limitation with regard to the amount of calls that can be handled in a LIM per second.

 

[slash50]

I don't think there's any limitation on DISA calls other than the already mentioned trunk capability...