Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

computer starts up to black screen with blinking cursor!!!

Status
Not open for further replies.

epod69

Programmer
Feb 11, 2005
44
US
Hey Everyone, I have 4 computers, exactly the same, and all have been working with win xp. My client wanted to be able to boot to pxe so I recently put in a 3com nic in all the computers and installed all the drivers and utilities, rebooted windows and everything seemed to be ok. I then set the first boot priority in the bios to lan (third being the hard-disk). All the computers then would boot to pxe just fine, but then when it timed-out (meaning going to the next boot priority), it would then show a black screen with a blinking cursor. I then changed the hard-disk as the first boot priority and it showed the same black screen... =(
So anyways, I cant figure out why all the machines now cant boot to windows when all I did was change the first boot priority. Has anyone every encounter this problem before?

Another problem I have been having with the computers is that it seems that they are over-heating. After about 10 minutes, the computer will get really loud, which looks like the fans are spinning at max speed. All for computers are using the new lga p4 and are in a slimline case, but the do have one fan at the top, and we also have had one computer just like them and have never had any load noises come from it...

So if anyone has any suggestions on what could be happening with the black screen or what seems to be overheating, that would be great. Thanx everyone for the help!!!!
 
314503 - Computer Stops Responding with a Black Screen When You Start Windows

What does the Boot.ini tell you?

HOW TO: Edit the Boot.ini File in Windows XP (Q289022)

A Discussion About the Bootcfg Command and Its Uses (Q291980)

Q305595 - HOW TO: Create a Boot Disk for an NTFS or FAT Partition in Windows XP

HOW TO: Install and Use the Recovery Console for Windows XP (Q307654)

Try Chkdsk /r from the Recovery Console.

Further advice can be found here.

XP will not boot
thread779-849914

244036 - Description of PXE Interaction Among PXE Client, DHCP, and RIS Server

Problems with certain NICs and a RIS-based Windows XP installation

The Dirtiest PC I Could Find

Computer ventilation.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top