Computer Halt

[codo]

I found this error messages on while my Novell 3.12 server running :
" Break at 0000001 because of INT3 breakpoitnt
EAX=001cooFF EBX=00000000 ECX=00c9d30c EDX=001c9d2c
EPI=.... .... etc..... "

The computer hang and i have to turn off the computer.I don't know how this errors occur. How should i prevent this error at the next time ?

 

[marvhuffaker]

With the info you provided, there's no way to know what caused the abend. You need to post to full error message.

Marvin Huffaker MCNE, CNE
Marvin Huffaker Consulting

http://www.redjuju.com

 

[itsp1965]

Do you have a serial device hanging off your Novell server or a UPS. This might be the source. It's been a while since I have seen a Netware 3 server abend, so this just a guess.

 

[karmic]

Not much on the web for this but...

http://www.tek-tips.com/gviewthread.cfm/lev2/3/lev3/19/pid/75/qid/613011

~ K.I.S.S - Don't make it any more complex than it has to be ~

 

[codo]

This is the full error message :
" Break at 0000001 because of INT3 breakpoitnt
EAX=001cooFF EBX=00000000 ECX=00c9d30c EDX=001c9d2c
EPI=001c9d6c EDI=000000PF EBP=00D4ED98 ESP=08D4EB90
EIP=00000001 FLAGS=00200246 CPF=00200246(PF 2F 1F)
00000001 CC INT3
# "

im using Novell2000 network adapter.

 

[codo]

Well, after i read the thread that karmic suggested to me, maybe it was because of the nliclear.nlm. Now I'm trying to disable the "load nliclear poll=30" command from my autoexec.ncf file and will see if this is the problem or not.

 

[codo]

.