Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

compatability

Status
Not open for further replies.

jdrake61

IS-IT--Management
Mar 19, 2002
30
US
How can I find out what digital and analog card are compatible for my Definity System. It is a G3 R8.2csi
 
I believe all digital and analog cards are compatible with all Definity products. You just have to use the right phones and wire connections with the cards. I.E. The old digital cards that are 8 port use a four wire scheme on pairs 2 and 3. They can drive either the old 7400 series sets or the newer 8400 series. The newer digital cards use a two wire connect and cannot support older sets. Analog cards should be able to use all sets in any system, especially your G3r8.2
 
Ask your Avaya representative for a Definity "bible" release 8.
In this book you'll find all the information you'll need.

Note: It's a "hard to get" one.

[afro]
 
The document Gerard (Brandaris) means is the DEFINITY ECS Release 8.2 System Descreption

For each release such a doc. excist, loads of these docs are on the Avaya web-site at the support tab.

This specific doc can be found with the following link:

Go to chapter 3 Cabinets, Carriers, and Circuit Packs then look for the heading Circuit Packs and Related Hardware, and finally go to the heading Circuit Packs in DEFINITY Please let me know if the information that was provided is helpfull.
Edwin Plat
A.K.A. Europe
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top