collection "All Systems" empty

[FlorianWallner]

Hello!
I `ve installed SMS 2.0 (with SP3) on a Win2000 Server-PC.

The problem: in the collection “All Systems” there`s only my own computer whereas the collection “All Users” is filled!

I think that I configured Site Boundaries correctly. (172.16.0.0 – one PC`s IP for instance is 172.16.5.39)

I would be very delighted if you could help me!
Thanks,
Florian

 

[Jpoandl]

Many people have problem setting up the SITE BOUNDARIES. You have to consider that the SUBNETs that define your site, will always use the client SUBNET MASK. Here's an example:

Say your everyone subnet starts with 10.x.x.x You might think that this is a class A address scheme. However, all clients are configured with a 255.255.0.0 subnet mask. Therefore, if you were to put 10.0.0.0 in your site boundaries, you would only pick up the client in the 10.0.x.x subnet...eventhough you have clients in the 10.1.0.0, 10.2.0.0, 10.3.0.0, 10.4.0.0...etc. Unfortunately, in the scenerio, you will have place all of your subnets into your SITE BOUNDARIES (10.0.0.0, 10.1.0.0, 10.2.0.0, 10.3.0.0, 10.4.0.0...etc)

Check your boundaries...this is the most common mistake. Also, check you schedule for network discovery...make sure that it has already tried to run. If not, schedule network discovery to run for a few hours...

Your clients should start appearing under COLLECTIONS... Joseph L. Poandl
MCSE 2000

If your company is in need of experts to examine technical problems/solutions, please check out

http://www.esavio.com