Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cobol Troubles
- Thread starter tr0n
- Start date
fredericofonseca
IS-IT--Management
I know as do many other users here.
What is your version, and what is the exact problem you are having.
I have several versions working with XP and all work fine.
Regards
Frederico Fonseca
SysSoft Integrated Ltd
What is your version, and what is the exact problem you are having.
I have several versions working with XP and all work fine.
Regards
Frederico Fonseca
SysSoft Integrated Ltd
- Thread starter
- #5
It's version 8.0.1? I believe. When I try to run it, I get an error 401 code and then it just shuts down. I tried compatability modes and nothing seemed to work. What gives? I would love to post the exact error wording and my particular setup for the shortcut to run, but sadly, I have already wiped the drive in an effort to make it run under Windows 2000 Pro, since all the other machines in the office operate under that with no problems.
fredericofonseca
IS-IT--Management
Well. it's too late now to try anything isn't it?
Try and get a new machine with XP on it, install your progrmas and then run them to see if you still get the error.
If you do then come back to us for help.
Regards
Frederico Fonseca
SysSoft Integrated Ltd
Try and get a new machine with XP on it, install your progrmas and then run them to see if you still get the error.
If you do then come back to us for help.
Regards
Frederico Fonseca
SysSoft Integrated Ltd
tr0n,
Have you contacted Liant Technical Support? What were you told?
A 401 error is a configuration error that is detected as the application begins. The cause of the configuration error must be corrected before it is meaningful to continue to run the application, so "it just shuts down." The cause of a 401 error is documented in Appendix A of the RM/COBOL User's Guide. Certainly nothing in the description of the error would lead me to believe that reformatting a drive would somehow correct the problem.
Tom Morrison
Have you contacted Liant Technical Support? What were you told?
A 401 error is a configuration error that is detected as the application begins. The cause of the configuration error must be corrected before it is meaningful to continue to run the application, so "it just shuts down." The cause of a 401 error is documented in Appendix A of the RM/COBOL User's Guide. Certainly nothing in the description of the error would lead me to believe that reformatting a drive would somehow correct the problem.
Tom Morrison
- Thread starter
- #8
Well, I don't know anything about Cobol and the guy who set all of this up before I came here is already long gone. I tried different types of installs and even copying all files along with extracted reg keys to the new system and that didn't work either. Compatability modes were a no go as well. Since I'm limited in my options from a lack of knowledge in this region, I figure why not just try it with 2000 since the rest of the systems use it and run just fine.
- Thread starter
- #9
Ok, after I completed my reinstall, I still have the same error. Guess some things just can't be fixed that easily. The exact error is as follows:
COGOL Configuration Error 410. Error processing configuration.
A message box also pops up that says:
Program 'CAS' terminated with return code 251. COBOL error code 410.
The shortcut I am using (which is the same as all of the other machines) is as follows:
"C:\Program Files\RMCOBOL\runcobol.exe" i:\CAS\PGM\CAS t=0 k C=RMPAN2W.CFG
Start in: I:\cas\pgm
(Network drive is mapped correctly.)
Any ideas now?
COGOL Configuration Error 410. Error processing configuration.
A message box also pops up that says:
Program 'CAS' terminated with return code 251. COBOL error code 410.
The shortcut I am using (which is the same as all of the other machines) is as follows:
"C:\Program Files\RMCOBOL\runcobol.exe" i:\CAS\PGM\CAS t=0 k C=RMPAN2W.CFG
Start in: I:\cas\pgm
(Network drive is mapped correctly.)
Any ideas now?
Well, 410 is different that 401...
I provided a link to the RM/COBOL User's Guide above. It is time to use it.
Checking Appendix A, you will find that error 410 is "Configuration file not found." The configuration file is named RMPAN2W.CFG.
Was this application created in-house, or licensed from a vendor?
Tom Morrison
I provided a link to the RM/COBOL User's Guide above. It is time to use it.
Checking Appendix A, you will find that error 410 is "Configuration file not found." The configuration file is named RMPAN2W.CFG.
Was this application created in-house, or licensed from a vendor?
Tom Morrison
- Thread starter
- #11
Contact Highland Lakes Software technical support. I think you will find them more helpful than I can be, since from this point there are application-specific details that they will know. 512-266-1424.
Tom Morrison
Tom Morrison
- Thread starter
- #13
The RMPAN2W.CFG is assumed to be in the same directory as where your application is installed (because the "C=" parameter does not list a pathname).
The RMPAN2W.CFG is typically found in the same directory as where your RM/COBOL runtime is installed. In your case, the runtime is installed in "C:\Program Files\RMCOBOL". You can try copying the RMPAN2W.CFG file from that directory into your application directory or change the C=RMPAN2W.CFG in the command line to read C="C:\Program Files\RMCOBOL\RMPAN2W.CFG".
Let me know how that works.
The RMPAN2W.CFG is typically found in the same directory as where your RM/COBOL runtime is installed. In your case, the runtime is installed in "C:\Program Files\RMCOBOL". You can try copying the RMPAN2W.CFG file from that directory into your application directory or change the C=RMPAN2W.CFG in the command line to read C="C:\Program Files\RMCOBOL\RMPAN2W.CFG".
Let me know how that works.
- Status
Similar threads
- Locked
- Question