Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gmmastros on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

CM8.1 upgraded to sip

Status
Not open for further replies.

letman2

Technical User
Mar 15, 2007
209
US
we upgraded to sip trunking from pri. Now that we do not have any ds-1 lines how to we sync time our 36 g450s and 2 g650s
 
You will need to use local sync if you have no PSTN DS1s. This should not be an issue as the stratum clocks in G4X0s are very good. Clock drift usually won't come into play unless you're send 30min faxes.

We're all ignorant, just in different subjects.
 
What changes do I have to make to implement local sync on the gateways (CM8.1)
 
Log in to each MG and use 'show sync tim' to see the current settings. If you see the word 'REMOTE' that means that CM is being used to program the sync settings for that site. Use 'set sync ?' to see commands used to control the MGs sync source in the GW.

We're all ignorant, just in different subjects.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top