CM 5.2.1 patch help needed 2

[Midstream]

I'm trying to load some patches on an LSP. When I try to activate one of these patches, I continually get the status "pending-commit"

Anyone want to nudge me in the right direction, please?


Red Hat Enterprise Linux ES release 4 (Nahant)
Kernel 2.6.18-128.AV7cPAE on an i686
login: dadmin
Password:
Last login: Sat May 15 15:51:13 from services-laptop
Sat May 15 15:57:30 EDT 2010
Enter your terminal type (i.e., xterm, vt100, etc.) [vt100]=>
3882: old priority 0, new priority 0
CommunicaMgr License Status NOT VALID. Server in dormant state. Check Active
dadmin@WDC-LSP> update_show
Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------
02.1.016.4-18111 activated cold patch 18111 for 02.1.016.4

KERNEL-2.6.18-128.AV7c pending_comm cold patch 2.6.18-128.AV7c for 0

SES Update ID Status Type Update description
------------------------------- ------------ ------- ---------------------------

Platform/Security ID Status Type Update description
------------------------------- ------------ ------- ---------------------------

dadmin@WDC-LSP>

 

[Mitch672]

you need to commit the KERNEL patch. do this:

"sudo update_commit KERNEL-2.6.18-128.AV7c"

AVAYA forgot to tell people about using the "sudo" command in fron of the "update_commit"



Mitch

AVAYA Certified Expert

 

[Midstream]

Mitch,

Once again you've proven why you're an MVP around this place!