We have this configured so that the ACS server issues IP addresses to the remote clients. However the problem we have is that the ACS server only issues one IP address, the last one in the IP pool specified. For example IP pool range 10.0.0.1 - 10.0.0.254 the only address issued is 10.0.0.254 this means that we are only able to connect 1 remote machine.
Has anyone else had this same problem or any ideas where the problem may lie.
Many thanks.
-------------------------------
If it doesn't leak oil it must be empty!!
Has anyone else had this same problem or any ideas where the problem may lie.
Many thanks.
-------------------------------
If it doesn't leak oil it must be empty!!
