CLID for 8X24 - DR5.1

[NorstarRSH]

I heard that all I need is a C8 module placed in parallel with the first 8 COs. ( Part # NT8B88FB-93 )

One station pair is needed to run the C8. CLID info auto displays on one set but all sets may do a F811.

Is this correct?

Can the one station be reception?

Do I need CLID line cards?

I have 3 line cards 2- NT7B75GA-93 & 1- NT5B40GA-93 WIll these suffice?

Thanks
Randy

 

[Arr]

RSH,
The C8 Module will provide CLID on the first 8 COs. CLID trunk cards are required for other COs in modules. The station port you need must not be connected to any other device. Your understanding of the display methond is correct.

PhM