Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Clariion 9137
- Thread starter TREXman
- Start date
netstructure
Technical User
hello pzxkys,
the named " clariion 9137" is the rebrand name from Old Clariion SCSI Array by StorageTek.
Antonio Bongiorno
the named " clariion 9137" is the rebrand name from Old Clariion SCSI Array by StorageTek.
Antonio Bongiorno
netstructure
Technical User
here all ST to Clarion Part Number:
pricing.
StorageTek - CLARiiON Description/ PN:
9131 -2000 SCSI Array 20 Slot
9133 -1000 SCSI Array 10 Slot
9135 -100 SCSI Array 7 Slot
9137 -3000 SCSI Array 30 Slot
9137-002 - 3500 Hybrid FC/SCSI Array 30 Slot
9140 - 5000 JBOD 10 Slot DAE
9145-002 - 5500 Fibre Array
9145-004 5700 Fibre Array
9160 -5000 JBOD 10 Slot DAE
9163 -5300 Fibre Array
9165 -5500 Fibre Array
9166 -5700 Fibre Array
Antonio
pricing.
StorageTek - CLARiiON Description/ PN:
9131 -2000 SCSI Array 20 Slot
9133 -1000 SCSI Array 10 Slot
9135 -100 SCSI Array 7 Slot
9137 -3000 SCSI Array 30 Slot
9137-002 - 3500 Hybrid FC/SCSI Array 30 Slot
9140 - 5000 JBOD 10 Slot DAE
9145-002 - 5500 Fibre Array
9145-004 5700 Fibre Array
9160 -5000 JBOD 10 Slot DAE
9163 -5300 Fibre Array
9165 -5500 Fibre Array
9166 -5700 Fibre Array
Antonio
- Thread starter
- #5
...so it should be a 9137 -3000. When I put it via SCSI (Adaptec 2944UW) it shows up as "DGC".
I tried to connect via Serial-Console-Port (9600/8/N/1) but it wont work...I tried a Tool calld "drm" from STK wont work...
Now I`m starting to get depresst...I have 3 Raidsystems whith each 30 Harddisks in it (...an old Admin left the firm and whith him a hole lot of Software Lic`s etc.)...and all I need is a bit Software and knowhow to get them running
So if someone knows how or who can help me:
Please let me know.
I tried to connect via Serial-Console-Port (9600/8/N/1) but it wont work...I tried a Tool calld "drm" from STK wont work...
Now I`m starting to get depresst...I have 3 Raidsystems whith each 30 Harddisks in it (...an old Admin left the firm and whith him a hole lot of Software Lic`s etc.)...and all I need is a bit Software and knowhow to get them running
So if someone knows how or who can help me:
Please let me know.
It's been at least 7 years since I set one of these units up, but they're rock-solid. If I remember correctly, you had two SPs (Storage Processors) installed in the back at the top. You might try 7-E-1 (and perhaps 2400 or 4800) ?
DRM sounds more like the utility for the rebranded NEC arrays (much like the SUN A1000), in which you could manage over SCSI or serial.
I'll check for some notes as well. Let us know how you make out.
DRM sounds more like the utility for the rebranded NEC arrays (much like the SUN A1000), in which you could manage over SCSI or serial.
I'll check for some notes as well. Let us know how you make out.
You should be able to manage a scsi clariion with the serial port. While it can be changed, the normal set up was for 96-8 -1 and even. You may have to hit the return key to get a display but it should come right up (assuming flare is loading and the array is not faulted).
- Status