We used to run the old HP NNM, and that had the ciscoworks 4.0 intigrated in it. That was very good. on the NNM map toolbar you have all the ciscoworks options, like, ciscoview, config Manager etc. and was using SNMP so that was very easy to Push config changes to device, and also have the option like, device to db and db to device config transfer. now the new NNM only way you can use those option is you need to install ciscoworks 2000, and intigrat that to NNM. and the new ciscoWorks2000 have to telnet to the device do any config push or changes, not by SNMP.