Cisco VPN client cant connect

[qweasdzxcqweasdzxc]

I just setup VPN on my asa 5510. I'm using a preshared key...I setup the ip range, told it to bypass existing access policies, acl's, etc...But my cisco VPN client keeps getting disconnected (reason 412). Connection Entry is similar to a description correct? I am using group authentication....Not to sure what else you need to know...I am a newb at setting up VPN routers and clients so I really appreciate your help.

 

[Ru55ell]

Are you using a Cisco VPN client to connect to your asa5510? I is either one of the following...

In the client under the "options" there is a check beside "Stafulfiewall(Always on)". Remove the check

or

Modify the group you configured and on the transport tab select IPsec over TCP instead of UDP.

 

[qweasdzxcqweasdzxc]

Alright, thanks for the advice...I cant wait to try that out when I get back to the office monday. I'll let you know what happens..
Thanks