I have just installed a new cisco call manager. I have three Q-sig pris between the Nortel 81 c rel 5 and the cm. My problem is when a user on the cisco side makes a local call - 9xxx-xxxx all that shows up for clid is the area code (860). If you user on the nortel side dials any local number you will see the clid. Both calls go out the nortel using the same set of pris. Any thoughts?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CISCO TO Nortel 81 c
- Thread starter glynnmsg
- Start date
- Status
Similar threads
- Locked
- Question