Cisco SPA504G as a 3rd Party IP Endpoint

[BryanQuenga]

I have a IP Office 500 running 7.0 (5). Just wondering if anyone has ever hooked up a Cisco SPA504G as a 3rd Party IP Endpoint? I was able to get a Yealink T-26 SIP phone to work fine. Customer has both Yealink phones and some Cisco phones. Would be nice to get them both set up. I don't think Cisco phones are support on the IPO yet. But just wondering if anyone has tried this and had any luck

Thanks

 

[Bas1234]

You don't need to do anything in the IPO if you left it default.

Follow these steps.

http://www.inphonex.com/support/cisco-spa504g-configuration.php

Proxy= IP addr of IPO
Display Name= XXX (XXX - the extension number)
Password= 1234 (use 1234 this is default for aut create in the IPO)
User Id= XXX (XXX - the extension number)
Auth Id= Give it a Name(This will auto create a name)

Save/Reboot

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged (Avaya Search tool

http://tinyurl.com/bas1234

)
______________________________________

 

[BryanQuenga]

Thank you very much. I am going to try it out right now. The link you gave me is exactly what i was looking for.