Cisco PIX 501Firewall won't forget users

[wgcs]

I have a Cisco PIX 501 Firewall with 10-user license... on our network, there are 25 machines, and about 5 users who move among the machines. It seems that the 501 "memorized" the first 10 IP addresses that used it. Since we use DHCP, it seems that only about 3 of the computers on the network are still using the same IP... anyway only those 3 can still get through the Firewall. All other users just don't get their packets forwarded through it.

So, Any Suggestions?

Do we need Static IP's?

How would I clear it so that I can specify which 10 computers can use it?

How do I specify which 10 computers can use it?

 

[dustybaker]

Try the 'show xslate' command to see the translations present. Then try 'clear xslate' to clear them. This should enable the other translations you are trying to use.