LizardKingSchwing
Programmer
Hi
I have an application which manages configurations from routers / switches and stores info from these in a DB.
The customer requires these metro series DWDM devices to be added to the compatabiltiy list for the application. I understand these Optical switches are unix based and do not use Cisco IOS .
What I need to know is about there SNMP capabilities , what Mib support they have , do they have the ability to TFTP there config to a TFTP server or how is there config stored.
If anyone knows any info. about these set of devices and can point me in the right direction to find out more on these it would be very helpful.
I've checked through most of the Cisco site however to not much avail.
Cheers
LK--<
I have an application which manages configurations from routers / switches and stores info from these in a DB.
The customer requires these metro series DWDM devices to be added to the compatabiltiy list for the application. I understand these Optical switches are unix based and do not use Cisco IOS .
What I need to know is about there SNMP capabilities , what Mib support they have , do they have the ability to TFTP there config to a TFTP server or how is there config stored.
If anyone knows any info. about these set of devices and can point me in the right direction to find out more on these it would be very helpful.
I've checked through most of the Cisco site however to not much avail.
Cheers
LK--<
