techiechick10
MIS
We are using Optivity NMS 10 on Win2K server. Optivity sees all of our Baystack equipment, but not our Cisco switches and routers. How can i get Optivity to monitor these as well??
Thanks!
Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cisco Catalyst Switches in NMS 10???
- Thread starter techiechick10
- Start date
- Status
netmanrick
Technical User
Hi:
Check your router folder options.If the entire folder is highlited you should??????? see Cisco routers.
Your Topology configuration may have to be tuned:Beyond_SONMP_Enable set to 1
Vendor_Id_Filter_Off set to 1
Hope this helps Rick Harris
SC Dept of Public Safety-DMV
Network Operations
Check your router folder options.If the entire folder is highlited you should??????? see Cisco routers.
Your Topology configuration may have to be tuned:Beyond_SONMP_Enable set to 1
Vendor_Id_Filter_Off set to 1
Hope this helps Rick Harris
SC Dept of Public Safety-DMV
Network Operations
- Status