Cisco Call Manager to an Option 11c via trunk line

[gulfdiver]

I'm trying to link up a Cisco Call Manager to our Nortel Option 11c vie a trunk line. What kind of card should I be using for this.. I have a TMDI 1.5m DTI/PRI card with what looks to be a fiber connection on the outside. Is this the correct way to do this or do I need a different card? or do I need a daughter board on the TMDI card?

Thanks for any help offered!

(BTW i'm not the one actually programming the solution but I need to get the hardware in place)

 

[NortelGuy1979]

A TMDI should do it for you; I assume they'll be setting up QSIG as the interface... The TMDI includes both the T1 hardware and DCH handler.

Matthew - Technical Support Engineer Sr.

http://www.linkedin.com/in/matty79